Vague or slopping shifter feel even after installing a short shifter or new OE shifter linkage bushings?  Looking for a more precise shifter feel in your classic BMW?  Consider replacing your old, worn rubber rear shifter bushing with new Turner poly to get the best shifting experience possible!  The Turner engineering team wasn’t satisfied with the other options on the market, so we set out to design the best solution for ease of installation and performance.

The competition requires the installer to cut or burn the rubber bushing out of the stock housing to be able to install their poly bushing, requiring reuse of an old worn out housing, or buying a new costly bushing assembly.  We decided this was cumbersome and unnecessary, so we designed a complete upgrade replacement bracket with a 70A polyurethane bushing preinstalled for a quick bolt-in installation.  Our bracket is precision formed with a CNC machined and TIG welded bushing cup to perfectly match the OEM bracket, and is made from 304 stainless steel for exceptional corrosion resistance.  The result is a complete design solution that creates much crisper shifting with nearly zero added NVH for a more engaging and enjoyable driving experience.

Note: Some shifter arms have a mushroom-shaped end. Use extra care installing our bushing on these arms. Filing this mushroom down makes installation easier, however simply applying sufficient pressure to the back side of the bushing during installation will allow this bushing to install smoothly.

This is the last bushing you will ever want or need for your E28, E30, or E34!

Product Features:

• Pre-installed bushing, NO cutting or burning for installation
• Corrosion resistant 304 stainless steel mounting bracket
• 70A durometer poly bushing for reduced NVH
• Ready to install out of the box
• Replaces Genuine BMW part number 25111220707
• Made in America

Have a newer BMW? Click here.

This fits the following BMWs:        

1987-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1987-1988 E28 BMW 528e 533i 535is M5
1987-1989 E24 BMW M6
1993-1995 E34 BMW 525i 530i 535i
1991-1993 E34 BMW M5

ECS Tuning's Polyurethane Transmission Mounts are designed to address the vital role of transmission mounts in your vehicle's suspension. The factory mounts are notorious for failures that can result in over-revving, mis-shifts, and in extreme cases, potential chassis damage. Our polyurethane mounts provide a robust solution, engineered for both street and track applications, guaranteeing enhanced performance while eliminating concerns about torn mounts.

Polyurethane stands out with its exceptional toughness, durability, and impressive wear resistance compared to rubber. It also exhibits resistance to water, oil, and grease while retaining its original shape even when subjected to significant compression. By reducing deflection, polyurethane facilitates effective power transfer. While there may be a slight increase in NVH (Noise, Vibration, Harshness), the benefits far outweigh this minor compromise in ride comfort. With a polyurethane durometer of 70A, our street mounts are versatile, offering both daily driving comfort and track durability. For more track-oriented enthusiasts, we provide stiffer mounts with an 80A durometer rating.

For a hassle-free installation, we supply a comprehensive DIY guide. ECS Tuning ensures that you are fully supported from start to finish.

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1996-1999 E36 BMW 323ic 323is 328i 328is 328ic
1995-1999 E36 BMW M3
1993-1995 E34 BMW 530i 540i 

If you've ever bled the clutch hydraulic system on your BMW, you know how frustrating it can be. Designed with both DIY enthusiasts and professional technicians in mind, our clever tool simplifies one of the most notoriously annoying steps in clutch service.

Crafted from high-quality aluminum and finished in a durable black anodized coating, our clutch slave cylinder bleeder tool is built to last. Its function is simple: the adjustable piston rod applies controlled pressure directly to the clutch slave cylinder’s piston, compressing it and reducing its internal volume. By minimizing the amount of air trapped inside the cylinder, bleeding becomes faster, cleaner, and far more effective—no more endless pedal pumping or inconsistent clutch feel. The result is firm, consistent clutch pedal engagement and a smoother overall driving experience, all achieved with less time and effort underneath the car.

FEATURES & BENEFITS

Simplifies bleeding the BMW clutch hydraulic system by reducing trapped air in the slave cylinder Eliminates excessive pedal pumping and inconsistent clutch feel Helps achieve firm, consistent clutch pedal engagement Crafted from high-quality aluminum for strength and longevity Durable black anodized finish resists wear and corrosion Designed for both DIY enthusiasts and professional technicians PRODUCT DEVELOPMENT

Our Clutch Slave Cylinder Bleeder Tool was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

If allowed in the rules these solid aluminum transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. These are machined from solid aluminum and have zero deflection, engine torque will cause a rubber or urethane mount to flex or deflect allowing more torque to passed through the drive line (instead of being wasted winding up the mount). This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of transmission mounts you will ever need. We very strongly recommend using the solid transmission and engine mounts together as a complete kit, mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.

These are a no-compromise design for all-out racing use, full solid aluminum mounts should not be used on street-driven cars since there is no material to absorb vibration making these quite harsh for regular street use (track cars don't care about noise).

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• Precision machined billet 6061-T6 aluminum housing
• Grade 10.9 stud - fear not, big turbo owners
• Engineered in-house and made in America

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe ​

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the ROUND shifter carrier bushings (some BMW models have oval bushings).

This item fits the following BMWs:
6/1986-1992 E30 BMW 318i 318is 325e 325es 325i 325is 325ic M3
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic
1999-2006 E46 BMW 323i 323ci 325i 325ci
1982-1988 E28 BMW 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the OVAL shifter carrier bushings (some BMW models have round bushings).

This item fits the following BMWs:
1992-1998 E36 BMW 328i 328is 328ic M3
1999-2002 E46 BMW 328i 328ci 330i 330ci
2001-2006 E46 BMW M3
1997-2003 E39 BMW 540i M5
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
1999-2003 E52 BMW Z8