Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
To make sure your temperature readings are as accurate as possible, replace your temperature sensor with a high quality OEM Bosch temperature sensor.
OEM replacement for BMW part # 13621709967, 13621709966, and 13621284397. Bosch coolant temperature sensor mounted in the cylinder head on models with the M42, M50 and S50 engines.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
1988-1991 E30 BMW 318i 318is 318ic M3
1992-1995 E36 BMW 318i 318is 318ti 318ic 325i 325is 325ic M3
3/1987-1988 E28 BMW 528e
1985-1988 E28 BMW535i 535is M5
1989-1995 E34 BMW 525i 535i M5
1985-1989 E24 BMW 635csi M6
1984-1987 E23 BMW 735i
1988-1992 E32 BMW 735i 735il
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Revolutionize your car maintenance with ECS Tuning's premium 304 stainless steel hose clamps. Eliminate dealership delays and inflated prices! These German-style clamps utilize T-bolts for hassle-free diameter adjustment. With various band widths available, these durable clamps ensure reliability without the hefty cost. Experience dealership-quality products at affordable rates, exclusively at ECS Tuning.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026
Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
ECS Tuning introduces premium full stainless steel hose clamps, offering superior quality and convenience for your BMW maintenance. Avoid dealership delays and overpricing by choosing from a selection of band widths, ensuring you receive top-quality hose clamps without overpaying.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.
Key benefits of the adjustable hose clamp include:
Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.
This product was last offered at the strikethrough price on
06-03-2026
This product was last offered at the strikethrough price on
06-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Upgrade your BMW's oil or transmission cooling system with the Turner Motorsport Genuine O-Ring, part number 17222245358. This high-quality O-ring is designed to provide a reliable seal, ensuring optimal performance and preventing leaks in your BMW's vital systems. Additionally, it is compatible with MINI applications, where it is commonly used on the end of the parking brake cable.
This product was last offered at the strikethrough price on
08-12-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Ensure your engine runs at the perfect temperature by using this versatile manual fan controller system, compatible with all 12v fan-equipped vehicles. With adjustable activation temperature settings ranging from 150°F to 240°F, you have precise control over your engine's cooling fan. The kit includes a probe-style temperature sensor and a generous 7 feet of wire, making it suitable for installation in vehicles of various sizes.
For added convenience, the system is equipped with a built-in A/C override feature, ensuring your cooling system works seamlessly. It's designed to work with one or two electric fans drawing a combined 25 amps or less. The package includes all the essential wiring connectors and hardware needed for a trouble-free installation.
With a lifetime warranty from Mishimoto, you can trust in the quality and durability of this manual fan controller kit.
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.
Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warnings, visit www.P65Warnings.ca.gov.
The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.
Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.
Most of the engines from the mid-1980s through the 1990s use the same thermostat design and they are interchangeable among the different temperatures. This is the 68*C thermostat, at the bottom of the temperature range. It should only be used in racing situations such as when deleting the engine fan. However, keep in mind that BMW spent a lot of time engineering the cooling system to work in all kinds of conditions and changing thermostat temperature is not recommended to fix any failures in the cooling system.
Mishimoto makes coolant tanks, radiators and much more for your Mini/BMW. Established in 2003 their commitment to absolute quality in the aftermarket world is evident through the quality and performance enhancing products they offer.
This thermostat fits the following BMWs:
1977-1983 E21 BMW 323i
1986-1991 E30 BMW 318is 318ic 325e 325es 325i 325ic 325is 325ix
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 528e
1986-1988 E28 BMW 535i
1989-1995 E34 BMW 525i 535i
1997-1998 E39 BMW 528i
1986-1989 E24 BMW 635csi
1988-1994 E32 BMW 735i 735il
1997-2000 Z3 BMW Z3 2.8 M Roadster M Coupe
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-12-2026
This OEM Hella/Mahle-Behr engine fan clutch fits BMW E46 M3, Z3 M Roadster, M Coupe 2001-2002, E34 535i & M5, and E32 735i 735il. Made to the same or higher standards of quality as the genuine part, ensuring proper fan control and cooling. Failed fan clutches can result in overheating due to the fan not spinning fast enough to deal with excess heat or can cause poor engine performance when a clutch has locked up causing the fan to be fully engaged permanently.
Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
2001-2006 E46 BMW M3
1989-1993 E34 BMW 535i M5
1988-1992 E32 BMW 735i 735il
2001-2002 Z3 BMW M Roadster M Roadster
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.
Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.
Universal Oil Cooler Black - 10 Row is engineered to maintain optimal oil temperatures and ensure peak engine performance under various driving conditions. This high-performance oil cooler effectively reduces oil temperatures, preventing a drop in pressure and maintaining proper engine lubrication. Featuring a robust 10-row design, it offers superior cooling efficiency compared to standard coolers.
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
BMW & MINI Universal Oil Cooler - 10 Row is a versatile cooling solution designed to enhance the performance and reliability of BMW and MINI vehicles. This high-quality oil cooler provides efficient cooling for the engine oil, ensuring optimal operating temperatures and extending the life of vital engine components.
Crafted with precision engineering and durable materials, the BMW & MINI Universal Oil Cooler - 10 Row is compatible with a wide range of BMW and MINI models, offering versatility and ease of installation. It effectively dissipates heat from the engine oil, reducing the risk of overheating and engine damage.
Investing in the BMW & MINI Universal Oil Cooler - 10 Row is a smart choice for BMW and MINI owners looking to improve their vehicle's performance and longevity.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026