BMW Suspension Parts for BMW 8 Series E31 (1991-1997)

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

BMW E31 Upper Rear Wishbone Ball Joint Bushing (Pair) provides an efficient and affordable solution for replacing the ball joint bushings in the upper rear control arm of your BMW E31. Unlike the costly full control arm replacement offered by BMW, this bushing set offers high-quality performance at a fraction of the price.

This bushing pair features a well-engineered rubber boot that has been designed to sit flush with the metal surface of the bushing, allowing for easy installation using standard press tools or a socket. The innovative design eliminates the need for a custom press tool and helps prevent damage to the boot during installation.

Made from durable polyurethane rubber, these bushings are built to withstand the elements and provide long-lasting performance. With OEM-level precision, they ensure a perfect fit and hassle-free, plug-and-play installation on the BMW E31.

• Cost-effective solution compared to replacing the full control arm
• Easy installation with standard press tools or a socket
• No need for a custom press tool, reducing the risk of damage during installation
• High-quality polyurethane construction for long-term durability
• Designed to meet the weight and stress demands of the BMW E31 platform
• OEM dimensions ensure a precise fit
• Plug-and-play design for simple installation

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

• Affordable alternative to electric valves
• Easy height adjustment for improved ride control
• Versatile 1/8" FNPT threads
• Reliable performance for BMW suspension systems

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW RUBBER MOUNTING

BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Features:

Bearing housing

• Precision CNC machined from 6061-T6 blue anodized aluminum
• Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
• CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

Bearing

• OEM BMW sealed and greased ball joint for exceptional durability and service life.

Performance

• Nearly instantaneous, crisp steering and braking response.
• Maintenance free, long lasting performance. 
• Improved road feel without undesirable NVH.

This item is an upgrade to the following BMWs: 
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi

BMW E31 Rear Traction Rod is a high-quality replacement for the discontinued original rear traction rods on the BMW E31. The original rear traction rods suffered from durability issues due to the transparent boot material, which couldn’t withstand exposure to the elements. This issue was also seen with the ball joint bushings that used the same material. The new rear traction rods utilize durable polyurethane rubber, designed to stand up to the harshest elements and provide long-lasting performance.

Designed from scratch with the highest-quality materials, this rear traction rod is built to handle the weight and demands of the E31 chassis. It is engineered to match OEM dimensions exactly, ensuring a straightforward installation with no need for modifications. After extensive testing on multiple E31 models over thousands of miles, this rear traction rod has proven to deliver superior durability and performance.

• Upgraded with high-quality polyurethane rubber for superior durability and resistance to wear
• Engineered to withstand harsh elements, ensuring long-term reliability
• Designed for a plug-and-play installation with OEM compatibility
• Built to meet the specific weight and performance requirements of the E31 chassis
• Tested extensively on E31 vehicles for optimal performance and reliability
• Helps restore proper traction rod function, improving handling and ride quality