Packaged by Turner for BMW 3 Series E30 (1984-1991)

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Over time, the water pump in BMW vehicles becomes a common point of failure, typically requiring replacement around the 60,000-mile mark. To ensure optimal performance of your vehicle's cooling system, it's also advisable to replace the thermostat during this service. Turner aims to make this maintenance task easier with its all-in-one Water Pump & Thermostat Replacement Kit.

This comprehensive kit includes:

Water Pump - OEM Geba (11519071562) 80°C Thermostat - OEM MAHLE (11531713040) Thermostat Housing - URO Parts (11531730470) Thermostat Housing Gasket - Genuine BMW (11531722692) Antifreeze/Coolant, 1 Gallon - Genuine BMW (82141467704) Opt for this premium kit to ensure a thorough and reliable repair, extending the lifespan of your BMW's cooling system.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Control Arms w/ Bushings
Control Arm Brackets w/ M3 Control Arm Bushings

• Cylinder Head Washer
• BMW Coolant / Antifreeze - 1 gallon
• Copper Exhaust Lock Nut
• Oil Filter
• Cylinder Head Bolt Set
• Engine Oil Drain Plug Washer
• Dielectric Spark Plug Boot Protector
• BMW TwinPower Turbo 5W-30 Engine Oil
• Cylinder Head Gasket
• Assembly Lube - 4 oz
• Engine Oil Drain Plug
• M20 Cylinder Head - complete

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

• Genuine BMW Engine Mount (x2)
• OEM Lemforder Manual Transmission Mount (x2)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E30 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E30 BMW 325ix

Regular maintenance is key to keeping your BMW running smoothly, and the water pump is a critical component that should be serviced every 60,000 miles. To ensure the overall efficiency of your cooling system, it's also recommended to replace the thermostat at the same time. Turner Motorsport has created a streamlined solution with their Water Pump & Thermostat Replacement Kit, making your cooling system upgrade simple and effective.

Kit Includes:

Meyle Water Pump with Metal Impeller (11510393338) VEMO Thermostat - 88°C (11537511580) Elring Thermostat Housing Flange Gasket (11531721172) Genuine BMW Coolant/Antifreeze (82141467704) Benefits:

Enhanced Cooling Efficiency: Earlier opening thermostat improves temperature control under performance conditions. Reliable Components: Includes high-quality parts from Meyle and VEMO, known for their durability and reliability. Complete Solution: All necessary components for a comprehensive cooling system refresh in one convenient kit. Performance-Driven Design: Ideal for those looking to maintain and enhance the cooling capabilities of their S55 engine.

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Sway Bar End Links
Strut Mounts & Gaskets
Reinforcement Plates
Trailing Arm Bushings
Hardware

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

BMW E30 318i 318is 325 325e 325es 325i 325is M3