There are many benefits to installing harnesses in your BMW -

• maintain a proper driving position
• keep you planted in the seat and not bracing with your left leg or shoulder
• lower lap times thanks to improved driver confidence
• advanced technology is safer than standard 3-point belts

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Rallye harnesses are Schroth's universal fit, bolt-in harness design that still meets DOT and TUV specs. The Rallye 4 harness fits most BMWs better than a Rallye 3 type thanks to its four mounting points that bolt to four existing anchor points in the BMW chassis: outboard lap belt anchor on B-pillar, inboard lap belt anchor on seat, and both rear seat belt anchors. The Rallye harnesses are a fixed, semi-permanent install but a quick-connect buckle is included in the rear seat harness so that the front and rear sections can be separated and tucked away when not in use. This also allows you to use the stock 3-point seatbelts in the front and rear seats without obstruction. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Rallye belts are not side-specific; they fit either the Left or Right side of the vehicle.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

E36 Fitment Note: a special bolt is required for installation on the stock E36 seat. Make sure you order this bolt for any E36 installations. Click here for the link to the bolt.

Rallye 4 Harness Summary:

• Suggested Use:  autocross, daily driver
• Shoulder Belt:  2" pull down
• Lap Belt:  2" pull down
• Buckle:  Rallye push button
• Installation:  permanent bolt-in
• Seat Compatability:  approved only for stock seats with headrest separated from backrest
• HANS compatible?  No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

Genuine BMW 5-speed dogleg shift knob emblem. This is the Euro dogleg pattern with 1st in the "down-left" position. Self-adhesive backing. Fits vintage knobs with round emblem only (not later style 'anatomic' knobs).

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

• Improves engine monitoring beyond factory gauge capabilities
• Early detection of potential issues for preventive maintenance
• Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
• Compatible with BMW models for easy installation and reliable performance
• Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.

These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface.

These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals).

Now available in (optional) black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

• Digital Water Temperature Guage (80-280 degrees) 
• Instructions
• Mounting hardware
• Decals
• Temperature sender - 1" long with 1/8" NPT threads
• Dual color display (Blue or red)

TechCare® FloorLiner™ & Floor Mat Cleaner is a custom engineered and blended formula made specifically for WeatherTech®. Our biodegradable foaming cleaner quickly removes scuff marks, dirt, and stains without affecting the finish and quality of WeatherTech® FloorLiner™ and Floor Mats.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!