BMW Engine Parts for BMW X Series F25 (2011+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less
OEM INA Accessory Belt Tensioner Assembly - N55 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:394063
Part#: 11288604266
In Stock
$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554453
Part#: 11288673720
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.
OEM INA Accessory Belt Tensioner Assembly - BMW N20 2.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:587382
Part#: 11287594969
In Stock
$ 72.99

This product was last offered at the strikethrough price on
04-15-2026

$ 43.99 USD
Free Shipping on orders $49 and up
$ 43.99 USD
Free Shipping on orders $49 and up
This is the main belt tensioner for the accessory belt.

Burger Motorsports - Corporate Logo
T#:21933055
Part#: N54PIIMINJECT
In Stock
$ 988.00 USD
$ 988.00 USD

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

  • Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
  • Supports increased airflow to enhance engine power and efficiency
  • Integrated top-mount port injection bungs optimize fuel injector spray and delivery
  • Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
  • Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
  • High-quality, high-temperature o-rings provide lasting durability and reliability
  • Exclusively available through Turner Motorsport, ensuring trusted quality and service
Show More Show Less
Ina - Corporate Logo
T#:20254639
Part#: 11367583819
In Stock
$ 101.99 USD
Free Shipping on orders $49 and up

Improve the performance and reliability of your BMW N20 2.0L engine with the BMW N20 2.0L Timing Chain Sprocket for the exhaust camshaft. This high-quality replacement part ensures precise timing and smooth operation of the exhaust camshaft, enhancing overall engine efficiency and longevity.

  • Enhances engine performance and reliability
  • Ensures precise timing of the exhaust camshaft
  • High-quality construction for long-lasting durability
  • Compatible with BMW N20 2.0L engines
If your timing chain sprockets are worn or damaged, replace them with this replacement part to ensure that your car has proper timing at all times.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 7 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less

VANOS Center Valve - Priced Each
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:588913
Part#: 11367583820
Back Ordered
$ 57.99

This product was last offered at the strikethrough price on
08-12-2026

$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up


Genuine BMW Vanos Central Valve -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less
Burger Motorsports - Corporate Logo
T#:21012590
Part#: F-G-PORTINJCONMO
No longer available
No longer available
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.
Show More Show Less
Ina - Corporate Logo
T#:393580
Part#: 11288620022
In Stock
$ 72.99

This product was last offered at the strikethrough price on
07-09-2026

$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belt. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.
Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
Ships in 1 Business Day
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Ina Lower Idler Pulley - F10, F25
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591651
Part#: 11288620023
Ships in 1 day
$ 31.99

This product was last offered at the strikethrough price on
06-29-2026

$ 29.54 USD
Free Shipping on orders $49 and up
$ 29.54 USD
Free Shipping on orders $49 and up
This is the lower idler pulley located within the accessory drive belt assembly.

Ina - Corporate Logo
T#:35998448
Part#: 11367583818KIT
Back Ordered
$ 267.99 USD
Free Shipping on orders $49 and up
Replace this so your timing chain meshes perfectly with the gear teeth for optimal performance.

Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less
OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Hydraulic valve lifter

Ina - Corporate Logo
T#:596290
Part#: 11337605330
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up
If your BMW has noisy or stuck lifters, replace them to improve performance and stop the annoying chatter
Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

Ina - Corporate Logo
T#:41492602
Part#: 11337559797
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Rocker arms work in conjunction with your camshafts and valves, applying pressure from the camshaft to open and close your intake and exhaust valves. If your rocker arm rollers have failed, this can lead to extreme camshaft damage, requiring the camshaft to be replaced. Replace your rockers whenever servicing your camshafts or replacing your hydraulic lifters to ensure long-term engine reliability.
Show More Show Less

Ina - Corporate Logo
T#:42301984
Part#: ZC0197
Ships in 7 Business Days
$ 32.99 USD
Free Shipping on orders $49 and up
Perfect for preventative maintenance or complete timing overhauls, this timing chain keeps your BMW diesel running strong and dependable.
Ina - Corporate Logo
T#:42301976
Part#: ZC0288
Ships in 7 Business Days
$ 61.99 USD
Free Shipping on orders $49 and up
The timing chain in any vehicle can begin to stretch and rattle over time. This is a common issue, and though BMW says it is a lifetime part, most enthusiasts decide to change them. This is a direct fit replacement for any broken or stretched chain.
Show More Show Less
Ina - Corporate Logo
T#:42234665
Part#: FP01441
Ships in 7 Business Days
$ 32.99 USD
$ 32.99 USD
Ensure consistent performance and prolong the life of your accessory drive system with this INA Idler Pulley, engineered for dependability and trusted by BMW enthusiasts.


Deflection Pulley
For vehicles with a production date up to 03/2016
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:593550
Part#: 11288604267
Special Order: No Guaranteed ETA
$ 49.48 USD
$ 49.48 USD
Burger Motorsports - Corporate Logo
T#:42133542
Part#: BMW-N55-PRM-950
Back Ordered
$ 1,138.00 USD
$ 1,138.00 USD
Ina - Corporate Logo
T#:42167239
Part#: FB02061K
Back Ordered
$ 133.99 USD
Free Shipping on orders $49 and up
Perfect for preventive maintenance or replacing worn components, the Accessory Drive Belt Kit is an essential upgrade to maintain the performance and reliability of your BMW

Ina - Corporate Logo
T#:42302023
Part#: FT0482
Ships in 7 Business Days
$ 139.99 USD
Free Shipping on orders $49 and up
Replace your worn tensioner with the OEM INA Accessory Drive Belt Tensioner Assembly and keep your BMW’s engine running smoothly and efficiently with quality parts from Turner Motorsport.

OEM INA Alternator Pulley - Overrunning Type - E82, E88, E9x, F10, F2...
For Vehicles with a 210A alternator & a Production Date from 04/2011
Ina - Corporate Logo
T#:42167226
Part#: EA0141
Back Ordered
$ 71.99 USD
Free Shipping on orders $49 and up
$ 71.99 USD
Free Shipping on orders $49 and up
Whether you're replacing a failing alternator pulley or performing preventive maintenance, this Alternator Pulley ensures your BMW continues to perform with factory precision and reliability.