Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...

Call In Or Chat For Best Price!

T#:8076779

Part#: D760-0062

In Stock

11% off MSRP $ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Qty

11% off MSRP

$ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Dinan High Flow Drop-In Replacement Filter - BMW G2X G42 B46 B48 B58 ...

Call In Or Chat For Best Price!

T#:32516358

Part#: D401-0046

In Stock

12% off MSRP $ 73.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

12% off MSRP

$ 73.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation

Show More Show Less

Universal Throttle Body Coupler - 45 Degree 2.5" (63.50mm)

T#:382969

Part#: 003402ECS03A-16

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD

Add to Wish List

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

High-quality silicone couplers and elbows for BMW projects
Precision-engineered for reliability and performance
Versatile solution for intercooler installations, custom intake systems, and more
Ensures durability and longevity for your automotive projects

Show More Show Less

ECS Exact-Fit High Flow Air Filter - Oiled

T#:5082399

Part#: 012054LA56-OIL

In Stock

Sale - Save 25% $ 93.99

This product was last offered at the strikethrough price on
06-14-2026

$ 70.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 93.99

This product was last offered at the strikethrough price on
06-14-2026

$ 70.49 USD

Add to Wish List

Dinan High Performance Intercooler Heat Exchanger - G2X G42 A90 B48 B...

Call In Or Chat For Best Price!

T#:25805796

Part#: D780-0003

Back Ordered

11% off MSRP $ 506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 449.99 USD

Add to Wish List

Qty

11% off MSRP

$ 506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 449.99 USD

Add to Wish List

The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger that improves the overall thermal management system so everything runs cooler and more efficiently while being budget-friendly. The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock, the Dinan heat exchanger is ready, and able, to assist in extending your vehicle's ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8.7º C reduction in charge air temps with a maximum reduction of nearly 12º C over 30 successive WOT pulls General improvement to the efficiency of the thermal management system, inclusive of engine cooling 45mm thick Dinan core vs. 26.75mm thick stock cooler core 68% more cooling surface area and volume than stock Reduces the tendency to heat soak / go in to limp mode Durable bar and plate design that is less susceptible to damage from road debris Pressure tested, 100% TIG welded, Aluminum construction Direct fit replacement with no modifications required Installation Instructions: https://documents.dinancars.com/d780-0003.pdf NOTE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Plastic Vacuum Tubing Kit - black - 8 Feet

T#:360488

Part#: 5097T321-8FT-A

In Stock

Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
06-13-2026

$ 28.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 37.99

This product was last offered at the strikethrough price on
06-13-2026

$ 28.49 USD

Add to Wish List

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
2.3mm Inner Diameter: Designed to meet specific engine requirements.
Black Color: Blends seamlessly with the engine components.
8-Foot Section: Provides flexibility to cut the hose to the required length.
Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Show More Show Less

BMW B46 B48 S58 MAP Sensor

T#:28138188

Part#: 13628637896

In Stock

Sale - Save 21% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.74 USD

Add to Wish List

Qty

Sale - Save 21%

$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.74 USD

Add to Wish List

BMW B46 B48 S58 MAP Sensor

Looking to enhance the performance of your BMW B46, B48, or S58 engine? The BMW B46 B48 S58 MAP Sensor is the perfect solution. This MAP sensor ensures accurate measurement of manifold absolute pressure, optimizing engine performance and fuel efficiency. Crafted with precision engineering and high-quality materials, it offers the following benefits:

Ensures accurate measurement of manifold absolute pressure
Optimizes engine performance and fuel efficiency
Crafted with precision engineering for reliability
Compatible with BMW B46, B48, and S58 engines for easy installation

Show More Show Less

CTS Turbo Charge Pipe Upgrade - B58 G-Chassis/A90 Supra 3.0L ...

For Vehicles 2019+ with updated B58 engine

T#:5802163

Part#: CTS-IT-349

Ships in 7 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58 engines in the G-chassis and A90 Toyota Supra 3.0T. The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. This charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part. You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level. Features: Precision CNC machined flanges for perfect fitment T6061 Mandrel-Bent Aluminum Pipe Robust Black Powdercoat Finish 4 ply Silicon Connectors Stainless Steel Clamps and Hardware 2 x 1/8″ NPT Water-Methanol Bungs with plugs Replaces BMW Part number 13718651066 (with 2 bolts on throttle body)

Show More Show Less

Universal High Flow Performance Air Filter - Dry (2.5" inlet) ...

T#:47644942

Part#: 003675ECS03-02

In Stock

Sale - Save 25% $ 58.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 58.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.24 USD

Add to Wish List

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD Ã¢â‚¬Â¢ 6" Filter Height Ã¢â‚¬Â¢ 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Show More Show Less

Turner Silicone Turbo Inlet Hose Kit - Stock Location - G-Chassis B58...

For vehicles with the earlier B58TU (B58D) engine only - Not for later models with the ...

T#:640163

Part#: 007292LA01KT

In Stock

Sale - Save 25% $ 375.99

This product was last offered at the strikethrough price on
06-14-2026

$ 281.68 USD

Add to Wish List

Qty

Sale - Save 25%

$ 375.99

This product was last offered at the strikethrough price on
06-14-2026

$ 281.68 USD

Add to Wish List

Owning a BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N55 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport G-Chassis B58 Upper & Lower Silicone Turbo Inlet Hoses!

Show More Show Less

aFe Power Magnum FLOW Pro DRY S Air Filter - G20 330i/xDrive, G29 Z4 ...

T#:588194

Part#: 31-10299

Ships on Sep 16, 2026

$ 76.00 USD

Add to Wish List

Qty

$ 76.00 USD

Add to Wish List

This Pro DRY S air filter features three layers of oil-free synthetic media, making it aFe's easiest to maintain performance air filter. With a progressive bump seal design and polyurethane frame, it is also extremely durable and simple to install. Washable and Reusable for Multiple Cleaning Cycles Pro DRY S Filter Media Features Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity

Show More Show Less

Dinan Carbon Fiber Cold Air Intake - A90 Supra & G29 Z4 B58 3.0L ...

Call In Or Chat For Best Price!

T#:18866021

Part#: D760-0065

In Stock

11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Qty

11% off MSRP

$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD

Add to Wish List

Both the Toyota GR Supra as well as the BMW Z4 are their respective brands' answer to the modern 2-seater sports coupe delivering enhanced driving enjoyment in a compact and stylish frame. With aggressive organic lines used unabashedly throughout, they are unapologetic in their outward style to the point of nearing brashness. This character is limited to driving dynamics and external appearance, however, with both the sound and under-hood visuals not matching the colorful outer demeanor. The factory air box in particular is an uninspired design, albeit functional, and leaves substantial room for improvement in terms of flow and resulting power gains. It also purposefully includes an intake resonator whose sole purpose is the elimination of turbo/intake noises - the same noises that those in the performance world relish. The Dinan carbon fiber intake for the platform rights these wrongs and delivers an intake capable of flowing 58% more air than the stock system resulting in improved throttle response, additional power and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time revealing a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To achieve the gains in flow that the Dinan intake delivers, the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free-flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan to effectively fill the volume of the enlarged air box and increase the filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved, and additional power is realized in the form of max gains of +13 WHP / +14 lb-ft of torque on an otherwise completely stock vehicle. Beyond stock or basic bolt-on equipped vehicles, the Dinan intake would expand the potential of the platform's power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of the build, the secondary air inlets, as well as the sound slot present on the lid, allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the outwardly visible system is made of immaculate 2x2 gloss twill carbon fiber resulting in vastly improved under hood appeal. Joined by the aluminum Dinan strut braces and matching carbon fiber engine cover, the engine bay instantly becomes equally as showy as the exterior. A unified style, inside and out, with a bit of turbo attitude. Features: More Power: Max gains of 13 WHP and 14 lb-ft of torque on a completely stock vehicle Enjoyably louder, sportier sound Improved throttle response Outflows factory intake by 58% or more Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Lid includes a brace valley to accommodate factory braces or optional Dinan strut braces Quick and easy installation

Show More Show Less

T-Map sensor

T#:27105159

Part#: 13628637900

In Stock

Sale - Save 21% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 21%

$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Silicone Coupler - Straight 3 5/8" (92mm)

T#:377483

Part#: 003402ECS01A-07

In Stock

Sale - Save 40% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 40%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

Enhances vehicle performance
Durable construction for long-lasting reliability
Specifically designed for BMW vehicles

Show More Show Less

Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...

Call In Or Chat For Best Price!

T#:8076777

Part#: D760-0060

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Dinan Carbon Fiber Cold Air Intake Kit - A90 Supra, G29 Z4 B46 2.0L ...

Call In Or Chat For Best Price!

T#:21012622

Part#: D760-0066

Ships in 9 Business Days

11% off MSRP $ 643.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 571.99 USD

Add to Wish List

Qty

11% off MSRP

$ 643.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 571.99 USD

Add to Wish List

Both the Toyota GR Supra as well as the BMW Z4 are their respective brands answer to the modern 2-seater sports coupe delivering enhanced driving enjoyment in a compact and stylish frame. With aggressive organic lines used unabashedly throughout, they are unapologetic in their outward style to the point of nearing brashness. This character is limited to driving dynamics and external appearance however, with both the sound and under hood visuals not matching the colorful outer demeanor. The factory air box in particular is an uninspired design, albeit functional, and leaves substantial room for improvement in terms of flow and resulting power gains. It also purposefully includes an intake resonator whose sole purpose is the elimination of turbo/intake noises - the same noises that those in the performance world relish. The Dinan carbon fiber intake for the platform rights these wrongs and delivers an intake capable of flowing 15% more air than the stock system resulting in improved throttle response, additional power and the elimination of a potential roadblock when opting to pursue a high-powered build. At the same time revealing a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To achieve the gains in flow that the Dinan intake delivers, the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the incorporated enlarged and optimized Dinan inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved, and additional power is realized in the form of max gains of +7 WHP / +8 lb-ft of torque on an otherwise completely stock vehicle. Beyond stock or basic bolt-on equipped vehicles, the Dinan intake would expand the potential of the platform's power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of the build, the secondary air inlets, as well as the sound slot present on the lid, allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the outwardly visible system is made of immaculate 2x2 gloss twill carbon fiber resulting in vastly improved under hood appeal. Joined by the aluminum Dinan strut braces and matching carbon fiber engine cover, the engine bay instantly becomes equally as showy as the exterior. A unified style, inside and out, with a bit of turbo attitude. Features: More Power: Max gains of 6 WHP and 7 lb-ft of torque on a completely stock vehicle Extended intake pipe inclusive of the turbo inlet Enjoyably louder, sportier sound Improved throttle response Outflows factory intake by ~15% Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Lid includes a brace valley to accommodate factory braces or optional Dinan strut braces Quick and easy installation

Show More Show Less

aFe Power Magnum FLOW Pro 5R Air Filter - G20 330i/xDrive, G29 Z4 sDr...

T#:588193

Part#: 30-10299

Ships in 3 Business Days

$ 71.00 USD

Add to Wish List

Qty

$ 71.00 USD

Add to Wish List

With up to a 45% increase in flow over stock, this Pro 5R air filter features factory-oiled media for maximum performance. Its progressive bump seal design and polyurethane frame makes it extremely durable and simple to install. Washable and Reusable for Multiple Cleaning Cycles Pro 5R Filter Media Features Five Layers of Progressive Oiled Cotton Gauze for Maximum Performance Deep, Open Pleats Allow for Increased Surface Area, Flow, and Dust Holding Capacity

Show More Show Less

aFe Magnum FLOW Pro DRY S Air Filter - A90 Supra

T#:588597

Part#: 31-10296

In Stock

$ 97.00 USD

Add to Wish List

Qty

$ 97.00 USD

Add to Wish List

ECS Tuning Charge Pipe Kit - BMW G20 G29 G05 G11 A90 Supra B58TU ...

Fits Gen 2 (B58TU) engine only

T#:6924303

Part#: 090762ECS09

In Stock

Sale - Save 5% $ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

Qty

Sale - Save 5%

$ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Inlet Pipe - BMW Gen2 B58 3.0L

T#:6924275

Part#: 090764ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 246.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 246.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.64 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your inlet pipe. The stock plastic BMW inlet pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Inlet Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow!

Show More Show Less

CTS High Flow Turbo Inlet - Supra A90/A91 And G20 M340i G29 M40i B58C...

T#:21176909

Part#: CTS-HW-450

Back Ordered

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

CTS Turbo is proud to announce our High Flow Turbo Inlet for Toyota Supra A90/A91 and BMW G20 M340i and G29 Z4 M40i with B58C 3.0L turbo engines. We designed our inlet to work with our intake system and it is compatible with the OEM intake system. Our inlet will provide more sound and flow compared to stock. This will improve throttle response, more power and reliability. Simple installation takes 10 minutes and can be done using basic hand tools. Product features: Large inside diameter for extremely high flow Cast aluminum with CNC machined flanges Compatible with most intake systems, including stock Durable aluminum construction, will not break like factory plastic part Simple installation Faster turbo spool, more airflow, improved turbo sound! Fitment: Toyota Supra A90/A91 B58C 3.0 (2020-present) BMW G29 Z4 M40i B58C 3.0 (2019-present) BMW G20 M340i B58c 3.0 (2020-present) Replaces the plastic turbo inlet that is found with BMW part number 13718656983

Show More Show Less

aFe Power Track Series Carbon Fiber Cold Air Intake System - Pro 5R F...

For 2019-2025 Model years

T#:10714259

Part#: 57-10026R

Ships in 3 Business Days

$ 750.00 USD

Add to Wish List

Qty

$ 750.00 USD

Add to Wish List

With carbon fiber components, impressive power gains, and the increased sound of the spooling turbo, the Track Series was made for performance enthusiasts like you. Dyno-Proven Gains up to +13 HP & +18 Lbs. x Ft. TQ Outflows Factory Intake by 34% Measured Flow: 335 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube and Air Filter Top Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Five Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. This Track Series air filter uniquely features a 100% twill weave carbon fiber top. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

Pro Dry S Restore Kit

T#:18766692

Part#: 90-10601

Ships in 3 Business Days

$ 21.00 USD

Add to Wish List

Qty

$ 21.00 USD

Add to Wish List

aFe Restore Kit for Pro5R Oiled Filters

T#:1943

Part#: 55-10460

In Stock

$ 21.00 USD

Add to Wish List

Qty

$ 21.00 USD

Add to Wish List

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less

46.5mm To 61.0mm Silicone Coupler - Each

T#:28570863

Part#: 017623ECS08A

In Stock

Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD

Add to Wish List

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

Durable silicone construction
Smooth interior surface for efficient airflow
Flexible and reinforced design prevents leaks
Secure fit for reliable performance
Hassle-free installation

Show More Show Less

ECS High Performance Aluminum Heat Exchanger - G2X B48 & B58 ...

Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply
Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply

T#:46890688

Part#: 050660LA01

In Stock

Sale - Save 11% $ 611.99

This product was last offered at the strikethrough price on
06-14-2026

$ 544.84 USD

Add to Wish List

Qty

Sale - Save 11%

$ 611.99

This product was last offered at the strikethrough price on
06-14-2026

$ 544.84 USD

Add to Wish List

BMW’s turbocharged B48 and B58 engines use a water-to-air charge air cooling system, with a front-mounted heat exchanger responsible for heat dissipation. Unfortunately, the factory single-row, 25mm core design is quick to heat soak under high load, leading to excessive intake air temperatures and potential limp mode conditions—especially on modified or track-driven cars.

ECS Tuning’s High Performance Aluminum Heat Exchanger was developed in-house as a direct replacement and upgrade over the factory unit. Designed for durability and maximum cooling efficiency, this heat exchanger is a must-have for high-horsepower street builds, spirited canyon driving, and extended track sessions. Built from TIG-welded 6061-T6 aluminum, the ECS unit eliminates the factory plastic end tanks—one of the system’s most common failure points. Each heat exchanger features CNC-machined billet aluminum hose connections, mounting flanges, and brackets for perfect OE fitment and trouble-free installation.

To drastically improve thermal efficiency, the factory 25mm single-row core has been replaced with a dual-row, 42mm performance core, offering a 72% increase in thickness. This expanded design nearly doubles coolant volume, allowing for greater heat dissipation, reduced intake air temperatures, and more consistent power delivery.

Replaces OEM Part Numbers: 17118666811, 17115A54040

Features:

6061 aluminum construction eliminates plastic end tank failure Dual-row, 42mm performance core provides 72% greater core thickness for improved cooling efficiency OE core: single-row, 25mm | ECS core: dual-row, 42mm TIG-welded 6061-T6 aluminum end tanks for exceptional strength Polished end tanks deliver a clean, high-quality finish CNC-machined billet connectors and brackets ensure seamless OE-style fitment Direct bolt-on upgrade – no modifications required

Show More Show Less

Silicone Coupler - Straight 3" (76.20mm)

T#:376702

Part#: 003402ECS01A-06

In Stock

Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD

Add to Wish List

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

High-quality silicone construction for durability
Precision-engineered design ensures a perfect fit
Versatile solution for various automotive projects
Enhances performance and reliability
Compatible with BMW and other vehicles

Show More Show Less

BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm)

T#:376708

Part#: 003402ECS01A-03

In Stock

Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD

Add to Wish List

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

Provides a secure and leak-free connection
Engineered for durability and flexibility
Straight design for easy installation
Perfect fit for BMW and MINI vehicles

Show More Show Less

aFe Power Track Series Carbon Fiber Cold Air Intake System - Pro DRY ...

For 2019-2022 Model years

T#:10714260

Part#: 57-10026D

Ships in 3 Business Days

$ 773.00 USD

Add to Wish List

Qty

$ 773.00 USD

Add to Wish List

With carbon fiber components, impressive power gains, and the increased sound of the spooling turbo, the Track Series was made for performance enthusiasts like you. Dyno-Proven Gains up to +10 HP & +14 Lbs. x Ft. TQ Outflows Factory Intake by 28% Measured Flow: 320 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube and Air Filter Top Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. This Track Series air filter uniquely features a 100% twill weave carbon fiber top. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

AFe Power BladeRunner Hot Side Intercooler Tube - Black - G29 Z4 M40i...

T#:599366

Part#: 46-20408-B

Ships in 3 Business Days

$ 393.00 USD

Add to Wish List

Qty

$ 393.00 USD

Add to Wish List

Directly replace your Z4's restrictive plastic intercooler tube with aFe's BladeRunner free-flowing, heat-resistant aluminum tube. TIG-Welded 2-1/2" To 3" Aluminum Tubing Features Factory Style Quick-Connect With an O-Ring Seal Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings 1/8" NPT Port is Provided for Connecting Sensors or Water Methanol Injection Powder Coated Wrinkle Black for Heat and Corrosion Resistance Flow and Performance: Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. Perfect Fit: This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This intercooler tube kit features a factory style billet aluminum quick-connect adapter with an O-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Custom Appearance: Finished in Wrinkle Black powder coating with a unique laser-etched aFe power logo for a custom look. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. When it comes to engineering for power, performance, protection and value, aFe POWER is the only choice.

Show More Show Less

AFE Track Series Carbon Fiber Cold Air Intake System W/ Pro 5R Filter...

T#:5677368

Part#: 57-10017R

Ships in 3 Business Days

$ 750.00 USD

Add to Wish List

Qty

$ 750.00 USD

Add to Wish List

Features: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

aFe Magnum FLOW Pro 5R Air Filter - A90 Supra

T#:588596

Part#: 30-10296

Ships in 3 Business Days

$ 91.00 USD

Add to Wish List

Qty

$ 91.00 USD

Add to Wish List

12.0" 3.75mm (5/32") ID Black Silicone Vacuum Hose

T#:19825269

Part#: 2101

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD

Add to Wish List

3" To 2.5" Silicone Coupler 3" Length

T#:363896

Part#: 003402ECS04A-02

Ships in 5 Business Days

Sale - Save 10% $ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD

Add to Wish List

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

Reliable connection for optimal airflow
Reduces the risk of leaks for enhanced performance
Engineered for durability and heat resistance
Fits both BMW and MINI models

Show More Show Less

Track Series Stage-2 Carbon Fiber Intake System W/ Pro DRY S Filter ...

T#:14155789

Part#: 57-10017D

Ships in 3 Business Days

$ 773.00 USD

Add to Wish List

Qty

$ 773.00 USD

Add to Wish List

With 53% flow increases and a +26 horsepower gain, this intake not only performs well but also looks the part. Made out of 100% carbon fiber, this intake is very lightweight and also washable thanks to the Pro Dry S air filter. The installation is almost as simple as it is to say that there is no better intake option for your car!

Show More Show Less

AFE Takeda Stage-2 Cold Air Intake System W/Pro 5R Filter

T#:5677369

Part#: 56-10015R

Ships in 3 Business Days

$ 387.00 USD

Add to Wish List

Qty

$ 387.00 USD

Add to Wish List

Feautures: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

AFe Power Takeda Momentum Cold Air Intake System - Pro 5R Filter - To...

For 2021+ model years only

T#:3283357

Part#: 56-70050R

Back Ordered

$ 435.00 USD

Add to Wish List

Qty

$ 435.00 USD

Add to Wish List

DETAILS: Dyno-Proven Gains up to +14 HP & +22 Lbs. x Ft. TQ Outflows Factory Intake by 16% Measured Flow: 370 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Five Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory and aFe CONTROL strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

AFe Power BladeRunner Hot Side Intercooler Tube - Blue - G29 Z4 M40i ...

T#:599367

Part#: 46-20408-L

Back Ordered

$ 430.00 USD

Add to Wish List

Qty

$ 430.00 USD

Add to Wish List

Directly replace your Z4's restrictive plastic intercooler tube with aFe's BladeRunner free-flowing, heat-resistant aluminum tube. TIG-Welded 2-1/2" To 3"" Aluminum Tubing Features Factory Style Quick-Connect With an O-Ring Seal Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings 1/8" NPT Port is Provided for Connecting Sensors or Water Methanol Injection Powder Coated Matte Blue for Heat and Corrosion Resistance Flow and Performance: Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. Perfect Fit: This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This intercooler tube kit features a factory style billet aluminum quick-connect adapter with an O-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Custom Appearance: Finished in Matte Blue powder coating with a unique laser-etched aFe power logo for a custom look. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW Z Series G29 (2019+)

Sub-Categories

Key Features:

BMW B46 B48 S58 MAP Sensor

ECS Silicone Coupler

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

3" To 2.5" Silicone Coupler 3" Length

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results