BMW Engine Parts for BMW 3 Series G20 (2019+)

B58 3.0L Oil Filter - Priced Each

T#:48539226

Part#: 11425B4C845

In Stock

7% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Qty

7% off MSRP

$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD

Add to Wish List

Ensure the longevity and performance of your BMW's engine with genuine BMW oil filters, the most crucial component of your oiling system. These filters effectively prevent contaminants from causing premature failure, ensuring your engine remains in peak condition for years. Discover the benefits of choosing BMW oil filters: Vital for preventing contaminants from damaging the engine. Genuine BMW quality for optimal performance and longevity. Guards against small metal particles that can lead to rapid component wear. Essential for maintaining the freshness and efficiency of the engine. Filters out harmful contaminants to prevent engine damage.

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

URO Fuel Tank Vent Valve - 13907643106

T#:50031887

Part#: 13907643106

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Replaces broken or failing vent valve.

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679242

Part#: 501-0082

In Stock

$ 572.99 USD

Add to Wish List

Qty

$ 572.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Sep 21, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

BMS Oil Catch Can - BMW G2X G42 B46/B48 2.0L

For models with the Gen2 B48 (B48D / B48TU) engine only

T#:46959262

Part#: BMSOCCB48G2X

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

For turbocharged BMWs, oil control issues have always been a slight headache. Burger Motorsports has designed a new oil catch can system specifically for the BMW Gen2 B46/B48 engine to address these issues. Featuring 100% CNC machining with zero welding for a precision fit and long life, the can itself is guaranteed for the life of the vehicle. The included hose exceeds the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no horsepower-robbing crankcase pressure buildup. The BMS oil separator maintains the factory's fully closed-loop PCV operation, preventing any PCV vapor from escaping into the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. The install takes around 10 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA.

Show More Show Less

Mechanical Water Pump - B58

T#:50031906

Part#: 11518482251

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Experiencing weak cabin heat at idle, overheating warnings, or unusual noises from beneath the dash? These are common signs that your water pump may need replacement. This cooling system water pump comes complete with a new water pump gasket for a proper seal. Note: One mounting thread includes a self-tapping screw.

Show More Show Less

Genuine BMW Water Pump - BMW G20-G23, G30-G32, G01-G02

For models with a production date up to 08/2020 without 48V Hybrid System

T#:48780726

Part#: 11515B51A32

In Stock

9% off MSRP $ 261.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 238.99 USD

Add to Wish List

Qty

9% off MSRP

$ 261.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 238.99 USD

Add to Wish List

Genuine BMW Cooling system water pump, includes water pump gasket. Note: One thread contains self-tapping screw.

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

URO Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

T#:50031925

Part#: 11128655331

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replaces broken or damaged oil filler cap.

Schwaben Piston Ring Specialty Toolset

T#:53361638

Part#: 3594SCH01AKT

In Stock

Sale - Save 7% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Qty

Sale - Save 7%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Whether you are building a high-performance engine or simply performing a routine rebuild, getting your piston ring end gaps and installation right is critical for optimal engine performance, compression, and longevity. Designed to meet strict standards, this comprehensive toolset provides everything you need to file, measure, and install piston rings safely without causing damage.

KIT CONTENTS

Schwaben Piston Ring Filer

Easily modify piston rings for OEM engine rebuilds and boosted applications Cuts quickly and smoothly, allowing you to easily avoid filing in excess Durable, bench-mountable construction with a long-lasting diamond abrasive wheel Piston Ring Installation Tool

Ensures even tension distribution during expansion Accommodates all pistons ranging from 60 mm to 175 mm in diameter Features an easy thumb-release locking mechanism for quick and secure operation Feeler Gauge Set

16 blades - 0.002-0.025 inch thickness measurements

Show More Show Less

Pro-Line Injector And Glow Plug Grease - 20g

T#:49787695

Part#: 22243

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

OEM Bosch Fuel Injector Replacement Kit - BMW B48 2.0L (Gen2 B46D B46...

For vehicles with the earlier Gen2 B46/B48 engine only

T#:51356041

Part#: BB48G2FIRKT

In Stock

$ 658.99

This product was last offered at the strikethrough price on
03-31-2026

$ 492.99 USD

Add to Wish List

Qty

$ 492.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

OEM Bosch Fuel Injector Replacement Kit - BMW B58 3.0L (Gen2 B58C B58...

For vehicles with the earlier Gen2 B58 engine only

T#:51356042

Part#: BB58G2FIRKT

In Stock

$ 990.99

This product was last offered at the strikethrough price on
03-31-2026

$ 740.99 USD

Add to Wish List

Qty

$ 740.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Burger Motorsport Oil Catch Can - G-Chassis Gen 3 B58

For 2025+ models with the Gen3 B58 engine

T#:46993589

Part#: G3B58OCC

Ships on Sep 21, 2026

Starting at $ 219.00 USD

Add to Wish List

Starting at $ 219.00 USD

Add to Wish List

It's no secret that B58 BMW turbo motors can suffer from oil control problems, causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels and the higher the mileage, the more apparent these problems become. The solution to this problem has finally arrived. The Burger Motorsports oil catch can. While there are other catch cans on the market, they all fall short in various areas. Some are mounted on the hot/turbo side of the motor, preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation, causing internal motor/ring sealing issues. Some have insufficient or no internal baffle systems, while others have internal baffle systems that are too restrictive. Some even bypass the PCV system altogether, venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems, Burger Motorsports designed their oil catch can kit from the ground up specifically for the 2025 and newer Gen 3 B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation, preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Installation takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 21, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

URO VANOS Central Valve (Long) - BMW B46/B48 B58 (Gen1 & Gen2) ...

T#:53044115

Part#: 11368696446

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

Replacement VANOS central valve, located within the VANOS sprockets.

CTS Turbo B58 Turbo Heat Shield - BMW F-series/G-series B58 (B58A/B58...

T#:50899213

Part#: HS-360

Ships in 7 Business Days

15% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Qty

15% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Reduces radiant heat from the turbocharger and improves overall performance. Made from high-quality steel, this heat shield provides superior thermal protection, helping to lower intake air temperatures (IATs) and safeguard surrounding components from excessive heat.

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 6-Port - w/ OEM Inle...

T#:46684838

Part#: B58G2P600

Ships in 4 Business Days

$ 1,136.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE600 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 550+ wheel horsepower!

Show More Show Less

Battery Tender Plus Advanced Battery Charging System

T#:49892371

Part#: BTT0210128

Back Ordered

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

Vargas HPFP Block-Off Plate - BMW B58 & S58

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

RK Tunes 1000 HP Brushless Fuel Pump Upgrade - G-Chassis B58 M340 M44...

T#:52762479

Part#: GB58LPFP1000

No longer available

Tested to 880whp on pump e85 (E80) with no signs of pressure drop at 75+ psi fuel pressure. 1000 hp on race gas.

VTT Valve Cover Gasket - BMW B58 TU

For vehicles with VTT Valve Cover

T#:52129727

Part#: VTTVCGASKB58TU

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT Gasket for the B58 TU Billet Valve Cover is an essential component designed for enthusiasts running the Vargas Billet Aluminum Valve Cover.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

Vargas Billet CNC Valve Cover - Silver - BMW B58 TU & Toyota A90/91 S...

For vehicles with TU (Technical Update) engine variant

T#:51813332

Part#: VTT-B58TU-BVC-SI

Ships in 10 Business Days

$ 1,769.99 USD

Add to Wish List

Qty

$ 1,769.99 USD

Add to Wish List

The Vargas B58 TU Billet Valve Cover is the ultimate engine bay centerpiece for the A90 Supra and G-Series BMW enthusiast.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Bapmic Engine Oil Pan - xDrive - BMW G01 G02 G2X G42 G45 G30 G60 B48 ...

T#:53608840

Part#: 11138580124

Ships in 1 Business Day

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

Oil pans sit low and can take some abuse, especially on lowered cars, making them among the most commonly damaged components beneath your BMW. A cracked or bent pan isn’t something to gamble with when engine lubrication is at stake. This pan is built to OEM specifications for proper fit, sealing, and long-term durability. It’s a direct replacement designed to bolt in just like the factory unit, making it an ideal solution when road debris or speed bumps strike first.

Show More Show Less

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...

For vehicles with VTT Modular PCV/Catch Can Systems

T#:52270288

Part#: OCC1DUADRAVAL

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.

PFS Port Injection Kit - 900CC - BMW B58

T#:51813340

Part#: PFS-B58-PI-8

Ships in 10 Business Days

$ 2,159.99 USD

Add to Wish List

Qty

$ 2,159.99 USD

Add to Wish List

When factory fueling becomes the bottleneck in your B58 build, the Vargas Turbo Technologies PFS Port Injection Kit steps in as the ultimate hardware solution.

VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...

For vehicles with VTT Billet & Cast Valve Covers

T#:52270290

Part#: OC16OADAPSC

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" WMC Bolts ...

T#:49648346

Part#: SCR13492-6

In Stock at Vendor

$ 1,845.99 USD

Add to Wish List

Qty

$ 1,845.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes WMC bolts, made from H11 tool steel and rated to 220 KSI, which are good for 15-18 torque cycles.

Show More Show Less

Hitachi Ignition Coil - BMW B58 B48/46 B38

T#:48850056

Part#: 12137619385

Ships in 6 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Get your engine's spark back with new ignition coils.

VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...

T#:49822558

Part#: VTTB58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

Vargas Billet Oil Drain Adapter - -10AN Male - BMW B58

T#:52094563

Part#: VTT-FAB-040-AN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.