BMW F86 X6 M S63 4.4L

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX

T#:26171623

Part#: HW-APX-M14125-90

Ships in 3 Business Days

$ 160.00 USD

Only available at this price

Add to Wish List

Qty

$ 160.00 USD

Only available at this price

Add to Wish List

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

Enhanced strength and safety
Improved pit stop times
Simplified wheel installation and removal
Versatility with extended length wheel studs
Reduced wear on hub threads
Long-term durability and safety
Simplified maintenance and improved efficiency

Show More Show Less

Elring Oil Pan Gasket - E70 E71 F15 F16 F86 F01 F02 F10 F12 F13 F85 ...

T#:596428

Part#: 11137566644

In Stock

$ 23.59 USD

Only available at this price

Add to Wish List

Qty

$ 23.59 USD

Only available at this price

Add to Wish List

OEM Elring Valve Cover Gasket Set - Cylinders 1-4 - BMW N63/S63 4.4L ...

T#:2691316

Part#: 11127614700

In Stock

$ 35.99 USD

Only available at this price

Add to Wish List

Qty

$ 35.99 USD

Only available at this price

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.

Show More Show Less

OEM Elring Valve Cover Gasket Set - Cylinders 5-8 - BMW N63/S63 4.4L ...

T#:2691317

Part#: 11127614701

In Stock

$ 48.99

This product was last offered at the strikethrough price on
04-06-2026

$ 34.99 USD

Only available at this price

Add to Wish List

Qty

$ 34.99 USD

Only available at this price

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.

Show More Show Less

OEM Elring Rear Crankshaft Cover With Seal - BMW N63 S63 4.4L ...

T#:2602228

Part#: 11148483798

In Stock

$ 80.99

This product was last offered at the strikethrough price on
04-21-2026

$ 57.99 USD

Only available at this price

Add to Wish List

Qty

$ 57.99 USD

Only available at this price

Add to Wish List

The rear main oil seal or crankshaft seals is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking it's territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the clutch surface. Replace yours and keep your oil in your engine.

Show More Show Less

Elring Sealing Compound

T#:592712

Part#: 509.860

In Stock

$ 21.99

This product was last offered at the strikethrough price on
08-07-2026

$ 18.99 USD

Only 10 available at this price

Limited Qty Sale

Add to Wish List

Qty

$ 21.99

This product was last offered at the strikethrough price on
08-07-2026

$ 18.99 USD

Only 10 available at this price

Limited Qty Sale

Add to Wish List

Used in multiple sealing applications

BMW Valve Cover Gasket

T#:15412491

Part#: 11128636546

Ships in 2 Business Days

$ 54.99

This product was last offered at the strikethrough price on
04-26-2026

$ 43.99 USD

Only available at this price

Add to Wish List

Qty

$ 43.99 USD

Only available at this price

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

T#:201362

Part#: EC71995ET22SMBK

Ships in 6 Business Days

$ 459.00 USD

Only available at this price

Add to Wish List

Qty

$ 459.00 USD

Only available at this price

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Elring Valve Seal Repair Kit

T#:591665

Part#: 11340054492

Ships in 2 Business Days

$ 53.99 USD

Only available at this price

Add to Wish List

Qty

$ 53.99 USD

Only available at this price

Add to Wish List

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 4 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Only available at this price

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Only available at this price

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

T#:201373

Part#: EC71910ET25AN

Ships in 6 Business Days

$ 469.00 USD

Only available at this price

Add to Wish List

Qty

$ 469.00 USD

Only available at this price

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 F15 F16 F85 F...

For vehicles with a production date from 10/2011

T#:596417

Part#: 11127607557

Ships on Sep 18, 2026

$ 83.65 USD

Only available at this price

Add to Wish List

Qty

$ 83.65 USD

Only available at this price

Add to Wish List

Fischer and Plath Gasket Ring

T#:362383

Part#: 07119963201

In Stock

$ 0.82 USD

Only available at this price

Add to Wish List

Qty

$ 0.82 USD

Only available at this price

Add to Wish List

A14x18-CU

Elring Intake Gasket Set - N52 N54 N55 N63

T#:362567

Part#: 11617547242

In Stock

$ 18.99

This product was last offered at the strikethrough price on
06-19-2026

$ 18.49 USD

Only available at this price

Add to Wish List

Qty

$ 18.49 USD

Only available at this price

Add to Wish List

If you are having vacuum leaks or if you remove the intake manifold for any reason, this seal must be replaced to prevent any leaks from forming. These are sold individually - a total of 4 are on the car.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N52 N54 N55 N63

Show More Show Less

Elring Lower Oil Pan Gasket - E70, E71, F15, F16 , F85, F86

T#:592767

Part#: 11137566808

In Stock

$ 16.99 USD

Only available at this price

Add to Wish List

Qty

$ 16.99 USD

Only available at this price

Add to Wish List

Gasket between upper oil pan & lower sump pan

Elring Oil Level Sensor O-Ring

T#:592989

Part#: 12617604790

In Stock

$ 7.00

This product was last offered at the strikethrough price on
03-04-2026

$ 5.19 USD

Only available at this price

Add to Wish List

Qty

$ 5.19 USD

Only available at this price

Add to Wish List

Used to seal sensor to the oil pan

Elring Turbo To Downpipe Exhaust Gasket - BMW

T#:393895

Part#: 18307553601

In Stock

$ 10.99

This product was last offered at the strikethrough price on
06-19-2026

$ 10.57 USD

Only available at this price

Add to Wish List

Qty

$ 10.57 USD

Only available at this price

Add to Wish List

This exhaust gasket is used to seal the turbo to downpipe connections.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N54,N54T,N55,N63,N63N,S55,S63 and S63N engines

Show More Show Less

OEM Elring Oil Drain Port Gasket - BMW N63 S63 4.4L

T#:2691327

Part#: 11428624158

In Stock

$ 10.99 USD

Only available at this price

Add to Wish List

Qty

$ 10.99 USD

Only available at this price

Add to Wish List

OEM replacement turbo oil drain line gasket - seals the turbo drain lines to the turbochargers.

V-Band Exhaust Pipe Clamp - N54 N55 N63 S55 S58 S63 Engines

T#:44767343

Part#: 203.020

Back Ordered

$ 28.99

This product was last offered at the strikethrough price on
07-30-2026

$ 18.99 USD

Only available at this price

Add to Wish List

Qty

$ 18.99 USD

Only available at this price

Add to Wish List

Ensure a secure connection between the downpipe and the turbo in your BMW. This high-quality clamp provides a reliable mount, ensuring optimal performance and exhaust system integrity.

Injector Seal

T#:15015295

Part#: 13537591006

In Stock

$ 4.39 USD

Only available at this price

Add to Wish List

Qty

$ 4.39 USD

Only available at this price

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

APEX Solid Gloss Black BMW Center Caps - Priced Each

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 10 Business Days

$ 9.99 USD

Only available at this price

Add to Wish List

Qty

$ 9.99 USD

Only available at this price

Add to Wish List

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs

T#:201376

Part#: EC719105ET22AN

Ships in 6 Business Days

$ 479.00 USD

Only available at this price

Add to Wish List

Qty

$ 479.00 USD

Only available at this price

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Elring Water Pump Gasket - E70, E71, F01, F02, F10, F12, F13, F15, F1...

T#:596454

Part#: 11517549445

Ships in 2 Business Days

$ 10.99 USD

Only available at this price

Add to Wish List

Qty

$ 10.99 USD

Only available at this price

Add to Wish List

Replace this gasket anytime you remove or replace the pump.

APEX Wheels Metal Valve Stem - Silver - BMW & MINI

T#:593646

Part#: HW-OEM-VALVE-SV

Ships in 3 Business Days

$ 17.00 USD

Only available at this price

Add to Wish List

Qty

$ 17.00 USD

Only available at this price

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs

T#:201371

Part#: EC71910ET25SMBK

Ships in 6 Business Days

$ 469.00 USD

Only available at this price

Add to Wish List

Qty

$ 469.00 USD

Only available at this price

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

BMW Exhaust Manifold Gasket

T#:15412488

Part#: 11657845076

Ships in 2 Business Days

$ 14.89 USD

Only available at this price

Add to Wish List

Qty

$ 14.89 USD

Only available at this price

Add to Wish List

Each time you remove your exhaust manifold, the gaskets need replaced. If you attempt to reuse them, they can leak and fail, causing noise and exhaust heat to fill your engine compartment. Pick up some new nuts and anti-seize to make the replacement job easier. Quantity of four required for re-installation.

Show More Show Less

Elring High Pressure Fuel Pump Gasket

Used for the valvetronic solenoids and the high pressure fuel pump

T#:579938

Part#: 593.22

In Stock

$ 11.99 USD

Only available at this price

Add to Wish List

Qty

$ 11.99 USD

Only available at this price

Add to Wish List

A quality replacement from a trusted German manufacturer.

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

T#:201374

Part#: EC719105ET22SMBK

Ships in 6 Business Days

$ 479.00 USD

Only available at this price

Add to Wish List

Qty

$ 479.00 USD

Only available at this price

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 E71

For vehicles with a production date up to 10/2011

T#:596414

Part#: 11127582454

Ships in 2 Business Days

$ 143.90 USD

Only available at this price

Add to Wish List

Qty

$ 143.90 USD

Only available at this price

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI

T#:593645

Part#: HW-OEM-VALVE-GM

Ships in 3 Business Days

$ 15.00 USD

Only available at this price

Add to Wish List

Qty

$ 15.00 USD

Only available at this price

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs

T#:201364

Part#: EC71995ET22AN

Back Ordered

$ 459.00 USD

Only available at this price

Add to Wish List

Qty

$ 459.00 USD

Only available at this price

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels Metal Valve Stem - Black - BMW & MINI

T#:593644

Part#: HW-OEM-VALVE-BK

Ships in 3 Business Days

$ 15.00 USD

Only available at this price

Add to Wish List

Qty

$ 15.00 USD

Only available at this price

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

Active Autowerke GESI Catted Downpipes - S63 N63

For 2014+ model years only

T#:397488

Part#: 11-041

Ships in 4 Business Days

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Only available at this price

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Only available at this price

Add to Wish List

Active Autowerke is proud to bring you our hand made Signature S63/N63 Downpipes for the twin-turbo V8 BMW X5M, X6M, 550i, 650i, X5, X6 models. This variant includes a pair of 4.5" ultra high flow GESI catalytic converter that will NOT produce a CEL!

Show More Show Less

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs

T#:201357

Part#: EC71995ET43RS

Ships in 6 Business Days

$ 426.00 USD

Only available at this price

Add to Wish List

Qty

$ 426.00 USD

Only available at this price

Add to Wish List

19x9.5" ET43 APEX EC-7 Wheel 23lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	43
Weight (lbs):	23
Profile:	2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

BMW Valve Cover Gasket

T#:15412490

Part#: 11128636547

Ships in 2 Business Days

$ 56.99

This product was last offered at the strikethrough price on
05-07-2026

$ 55.00 USD

Only available at this price

Add to Wish List

Qty

$ 55.00 USD

Only available at this price

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

For 2014+ model years only

T#:51075079

Part#: 11-041A

Ships in 4 Business Days

$ 2,279.00 USD

Only available at this price

Add to Wish List

Qty

$ 2,279.00 USD

Only available at this price

Add to Wish List

For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)

Show More Show Less

Elring Oil Drain Plug - N62 N63 4.4L 4.8L

T#:45415257

Part#: 877.870

Special Order: No Guaranteed ETA

$ 3.99 USD

Only available at this price

Add to Wish List

Qty

$ 3.99 USD

Only available at this price

Add to Wish List

Replacement oil drain plug from Elring - includes a new sealing washer Replaces BMW # 07119905428

Elring Thermostat Gasket - BMW N62 N63 S55 S58 S63

T#:45415197

Part#: 773.870

Special Order: No Guaranteed ETA

$ 7.99 USD

Only available at this price

Add to Wish List

Qty

$ 7.99 USD

Only available at this price

Add to Wish List

Seals the thermostat to the coolant pump Replaces BMW # 11538632664

Elring Front Axle Seal - 44x67x10x15.5mm

T#:45005610

Part#: 761.160

In Stock

$ 10.99

This product was last offered at the strikethrough price on
05-15-2026

$ 9.99 USD

Only available at this price

Add to Wish List

Qty

$ 9.99 USD

Only available at this price

Add to Wish List

Drive axle seal, located on the front differential. This seal works on both the left & right side axles. Due to regular exposure to dirt and debris, axle seals are a common failure item. An axle seal failure can cause fluid to leak from the differential housing, eventually causing it to run dry, which can result in front differential failure. Prevent a dangerous failure and costly repair bill by replacing your compromised axle seals with this genuine component directly from BMW. Replaces BMW p/n 31508860349, 31508743675, & 33107505601

Show More Show Less

Elring Throttle Body Gasket - E70, E71, F06, F10, F12, F13, F85, F86 ...

T#:45483594

Part#: 904.910

Special Order: No Guaranteed ETA

$ 10.99 USD

Only available at this price

Add to Wish List

Qty

$ 10.99 USD

Only available at this price

Add to Wish List

Seals the throttle body to the intake manifold

Oil drain plug M18x1.5x12 - 07119905428

T#:45483616

Part#: 587.140

Special Order: No Guaranteed ETA

$ 3.99 USD

Only available at this price

Add to Wish List

Qty

$ 3.99 USD

Only available at this price

Add to Wish List

Best used to replace a stripped drain plug, or avoid a leaky worn out drain plug. OE: 07119905428

Gasket timing case - 11127605211

T#:45483618

Part#: 648.290

Special Order: No Guaranteed ETA

$ 7.99 USD

Only available at this price

Add to Wish List

Qty

$ 7.99 USD

Only available at this price

Add to Wish List

Sits between the upper timing cover and the engine block. OE : 11127605211

APEX EC-7 19x9.5" ET33 Anthracite Wheel 22.5lbs

T#:201361

Part#: EC71995ET33AN

Ships in 6 Business Days

$ 459.00 USD

Only available at this price

Add to Wish List

Qty

$ 459.00 USD

Only available at this price

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

BMW Exhaust Manifold Gasket

T#:15015313

Part#: 11627589106

Back Ordered

$ 48.47 USD

Only available at this price

Add to Wish List

Qty

$ 48.47 USD

Only available at this price

Add to Wish List

Waring exhaust manifold gaskets can lead to several issues like exhaust leaks, mpg loss and exhaust smell in your cabin. Replace these asap to prevent these issues from happening!

APEX EC-7 19x9.5" ET33 Silver Wheel 22.5lbs

T#:201360

Part#: EC71995ET33RS

Ships in 6 Business Days

$ 459.00 USD

Only available at this price

Add to Wish List

Qty

$ 459.00 USD

Only available at this price

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x9.5" ET33 Satin Black Wheel 22.5lbs

T#:201359

Part#: EC71995ET33SMBK

Ships in 6 Business Days

$ 459.00 USD

Only available at this price

Add to Wish List

Qty

$ 459.00 USD

Only available at this price

Add to Wish List

19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results