BMW F80 M3 S55 3.0L

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Only available at this price

Add to Wish List

Qty

$ 859.00 USD

Only available at this price

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Only available at this price

Add to Wish List

Qty

$ 105.00 USD

Only available at this price

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Only available at this price

Add to Wish List

Qty

$ 49.00 USD

Only available at this price

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Only available at this price

Add to Wish List

Qty

$ 200.00 USD

Only available at this price

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Only available at this price

Add to Wish List

Qty

$ 479.00 USD

Only available at this price

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Only available at this price

Add to Wish List

Qty

$ 95.00 USD

Only available at this price

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

3/8" Quick Disconnect Adapter With 1/8" NPT Port

T#:29500156

Part#: 200.1105

In Stock

$ 24.00 USD

Only available at this price

Add to Wish List

Qty

$ 24.00 USD

Only available at this price

Add to Wish List

Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adaptersÂ are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate VitonÂ© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Only available at this price

Add to Wish List

Qty

$ 729.00 USD

Only available at this price

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

BMW Fuel Line Upgrade - Short Line Kit

T#:29267521

Part#: 900.1025

In Stock

$ 150.00 USD

Only available at this price

Add to Wish List

Qty

$ 150.00 USD

Only available at this price

Add to Wish List

Factory fuel lines are often not designed or safe for use with ethanol based fuels. Our PTFE fuel lines are the perfect solution for installing into your vehicle without having to permanently modify your vehicle's fuel lines. Simply uninstall the factory line and install our pre-measured lines that come setup with the correct fittings for a plug-n-play install in your vehicle. Please Note: This does NOT include an ethanol Content Sensor.

Show More Show Less

Akrapovic Slip-On Titanium Exhaust System - Titanium Or Carbon Fiber ...

T#:9383747

Part#: M-BM/T/8HKTPDK

In Stock at Vendor

Starting at $ 7,034.99 USD

Only available at this price

Add to Wish List

Starting at $ 7,034.99 USD

Only available at this price

Add to Wish List

This axle-back exhaust system is manufactured entirely from titanium. This makes this system ideal for cutting weight while being structurally stronger than the OE exhaust system. The engineers at Akrapovic have retained the dual mode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the S mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car. The included exhaust pipe tips are made completely from titanium OR a carbon fiber/titanium composite to add a high-end, refined style. Performance has not been left out of the design. The system dramatically reduces backpressure and is an excellent starting point for further engine tuning or turbo modifications. Even when installed on an otherwise stock vehicle a gain of 7.3 horsepower and 17.4 Nm/12.8 lbs-ft of torque are achieved. Furthermore, a weight reduction of 3.0 kg/6.6 lbs. is realized. The OEM catalysts are retained, so no reflashing of the ECU is required and the check engine light will not be triggered. Titanium muffler with integrated exhaust valves Statistics: +7.3 HP (at 4400 rpm) +17.4 Nm/12.8 lbs-ft of torque (at 2350 rpm) 3 kg/6.6 lbs. lighter than stock Not for sale outside the US or Canada.

Show More Show Less

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Only available at this price

Add to Wish List

Qty

$ 15.00 USD

Only available at this price

Add to Wish List

Akrapovic 14-17 BMW M3 (F80) Slip-On Line (Titanium) w/ Carbon Tips ...

T#:26538306

Part#: M-BM/T/8H-C

In Stock at Vendor

$ 7,034.99 USD

Only available at this price

Add to Wish List

Qty

$ 7,034.99 USD

Only available at this price

Add to Wish List

The latest addition to the BMW M series, the impressive M3/M4, delivers outstanding performance that can be further enhanced with the addition of an Akrapovič Slip-On exhaust system. Constructed from titanium, with specific components crafted in Akrapovič's own foundry, this system boasts larger pipes compared to the stock exhaust, resulting in reduced back pressure and increased power, especially at lower RPMs. Featuring a completely new design, it contributes to weight reduction and delivers added power while producing a sporty sound meticulously engineered to enhance lower frequencies for an immersive auditory experience. The heightened power and torque contribute to an enhanced driving experience, complemented by improved agility. To elevate the visual appeal, the Slip-On system offers the choice of titanium or carbon tailpipes and an eye-catching carbon rear diffuser. Vehicles equipped with Akrapovič exhaust systems benefit from significant performance enhancements and heightened responsiveness, experiencing substantial increases in power and torque across the entire RPM range. All Akrapovič exhaust systems undergo precise measurements using computer-controlled flowbenches.

Show More Show Less

Akrapovic Carbon Fiber Mirror Cap Set - Matte Finish - F8X M3 & M4 ...

T#:559415

Part#: WM-BM/CA/2/M

Back Ordered

$ 990.99 USD

Only available at this price

Add to Wish List

Qty

$ 990.99 USD

Only available at this price

Add to Wish List

Carbon fiber mirror caps are an easy and effective exterior accessory. These are made by Akrapovic and are the perfect match to their other carbon trim - muffler tips and rear bumper diffuser. Simply unsnap the original mirror cap and install the new carbon type.

Show More Show Less

Akrapovic Carbon Fiber Mirror Cap Set - High Gloss - F8X M3 & M4 ...

T#:567358

Part#: WM-BM/CA/2/G

Back Ordered

$ 1,142.99 USD

Only available at this price

Add to Wish List

Qty

$ 1,142.99 USD

Only available at this price

Add to Wish List

Carbon fiber mirror caps are an easy and effective exterior accessory. These are made by Akrapovic and are the perfect match to their other carbon trim - muffler tips and rear bumper diffuser. Simply unsnap the original mirror cap and install the new carbon type.

Show More Show Less

Akrapovic Carbon Fiber Rear Diffuser - High Gloss Or Matte - F80/82/8...

T#:9416023

Part#: DI-BM/CA/4PDK

Back Ordered

Starting at $ 1,931.99 USD

Only available at this price

Add to Wish List

Starting at $ 1,931.99 USD

Only available at this price

Add to Wish List

This rear carbon fiber diffuser will add to the style of your M vehicle, giving it a much sportier and aggressive appearance from the rear. The M3/M4 are great looking vehicles, nearly flawless, but there is always room for improvement! Made from high quality carbon fiber and built for a tight, stock-like fitment, this diffuser is the way to go when you want to add it by itself or when upgrading your exhaust system. This can help performance exhaust tips stand out even greater compared to the stock diffuser. Finish comes in either: High Gloss Matte

Show More Show Less

Akrapovic Sound Kit - F8X BMW M3 & M4

T#:557171

Part#: P-HF1100

Back Ordered

$ 1,029.99 USD

Only available at this price

Add to Wish List

Qty

$ 1,029.99 USD

Only available at this price

Add to Wish List

The Sound Kit is a remote control for the valves on the Akrapovic muffler. While the muffler valves are also controlled like the factory valves in Comfort, Sport, and Sport+ modes, the Sound Kit will let you open or close the valves via handheld remote or even from your phone (iOS or Android app). The Sound Kit works with the existing wiring for the Akrapovic system so installation is a breeze.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Motiv ReFlex+ for BMW

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

ReFlex+ Install Harness - Flying Lead

3/8" Quick Disconnect Adapter With 1/8" NPT Port

Motiv ReFlex+ Control Unit

BMW Fuel Line Upgrade - Short Line Kit

Akrapovic Slip-On Titanium Exhaust System - Titanium Or Carbon Fiber ...

ReFlex+ Install Kit

Akrapovic 14-17 BMW M3 (F80) Slip-On Line (Titanium) w/ Carbon Tips ...

Akrapovic Carbon Fiber Mirror Cap Set - Matte Finish - F8X M3 & M4 ...

Akrapovic Carbon Fiber Mirror Cap Set - High Gloss - F8X M3 & M4 ...

Akrapovic Carbon Fiber Rear Diffuser - High Gloss Or Matte - F80/82/8...

Akrapovic Sound Kit - F8X BMW M3 & M4

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results