BMW 4 Series F32 (2014+)

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Only available at this price

Add to Wish List

Qty

$ 119.00 USD

Only available at this price

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive

T#:27238720

Part#: NCV27043

In Stock

$ 131.99 USD

Only available at this price

Add to Wish List

Qty

$ 131.99 USD

Only available at this price

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive

T#:27238721

Part#: NCV27044

In Stock

$ 144.99 USD

Only available at this price

Add to Wish List

Qty

$ 144.99 USD

Only available at this price

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

Rogue Engineering E9x/F8x Short Throw Clutch Pedal Arm

T#:45039678

Part#: RE.310.

In Stock

$ 439.00 USD

Only available at this price

Add to Wish List

Qty

$ 439.00 USD

Only available at this price

Add to Wish List

GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ... For vehicles with an Auto or Sport Auto Transmission

T#:27238726

Part#: NCV27030

In Stock

$ 162.99 USD

Only available at this price

Add to Wish List

Qty

$ 162.99 USD

Only available at this price

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ... For vehicles with an Auto or Sport Auto Transmission

T#:27238727

Part#: NCV27031

Ships in 3 Business Days

$ 140.99 USD

Only available at this price

Add to Wish List

Qty

$ 140.99 USD

Only available at this price

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships on Sep 24, 2026

$ 229.99 USD

Only available at this price

Add to Wish List

Qty

$ 229.99 USD

Only available at this price

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

Black Forest Industries Billet Heavy Weight Shift Knob - Alcantara Or...

T#:391722

Part#: GS2B

In Stock

Starting at $ 184.99 USD

Only available at this price

Add to Wish List

Starting at $ 184.99 USD

Only available at this price

Add to Wish List

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less

Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 & ...

For vehicles with a production date from 11/2014+ and a manual transmission

T#:48401514

Part#: RE.RCBM-F8X

Ships on Sep 23, 2026

$ 109.00 USD

Only available at this price

Add to Wish List

Qty

$ 109.00 USD

Only available at this price

Add to Wish List

The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the F8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.

Show More Show Less