Fuel Injectors for BMW X Series F16 (2015+)

Vitesco Fuel Injector With Seal Ring - Index 12 - BMW N54 N63 S63 ...

T#:30629652

Part#: 13538616079

In Stock

12% off MSRP $ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 495.99 USD

Only available at this price

Add to Wish List

Qty

12% off MSRP

$ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 495.99 USD

Only available at this price

Add to Wish List

If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the N54 have been a common failure item, this is the most up to date injector for the N54 engine. It is highly recommended to replace older injectors also if your car is modified or you plan to modify it. Important information to consider when replacing injectors: It is recommended to replace at least 3 injectors at a time, replacing all injectors in a cylinder bank, instead of mixing and matching. If ALL injectors in a bank are index 11 or greater, injectors may be replaced individually with a new injector. If your stock injectors are index 10 or less, all 3 injectors per bank must be replaced. For V8s, all four in that bank must be replaced. Vehicles with old injector 7585261 will need to inspect their existing injectors to determine if these can be replaced individually. Replacement also requires 13537564751 for each injector.

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Only available at this price

Add to Wish List

Qty

$ 60.00 USD

Only available at this price

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:36947243

Part#: 501-0028

In Stock

$ 409.99 USD

Only available at this price

Add to Wish List

Qty

$ 409.99 USD

Only available at this price

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

BMW Injector Sockets - 17mm & 14mm

T#:385905

Part#: SLY13400

Back Ordered

$ 99.99 USD

Only available at this price

Add to Wish List

Qty

$ 99.99 USD

Only available at this price

Add to Wish List

Correct sockets designed to protect injectors that are easily damaged

BMW (N54/N63/S63) Injector Line Socket

T#:3543423

Part#: LCB438SCH

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD

Only 0 available at this price

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD

Only 0 available at this price

Add to Wish List

Unique flare nut socket design allows for easy access without damaging expensive injectors

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

Ships in 9 Business Days

$ 1,799.00 USD

Only available at this price

Add to Wish List

Qty

$ 1,799.00 USD

Only available at this price

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Ships in 4 Business Days

$ 64.99 USD

Only available at this price

Add to Wish List

Qty

$ 64.99 USD

Only available at this price

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1600cc -...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:43041714

Part#: 501-0114

Ships in 9 Business Days

$ 1,040.99 USD

Only available at this price

Add to Wish List

Qty

$ 1,040.99 USD

Only available at this price

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Vitesco - Fuel Injector Replacement Kit - Index 12 - N63, S63 Engines...

T#:33479599

Part#: 13538616079VKT

In Stock

$ 4,119.99 USD

Only available at this price

Add to Wish List

Qty

$ 4,119.99 USD

Only available at this price

Add to Wish List

If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the have been a common failure item, this is the most up to date injector for the N63 and S63 engine.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 9 Business Days

$ 64.99 USD

Only available at this price

Add to Wish List

Qty

$ 64.99 USD

Only available at this price

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

T#:21012590

Part#: F-G-PORTINJCONMO

No longer available

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679242

Part#: 501-0082

In Stock

$ 572.99 USD

Only available at this price

Add to Wish List

Qty

$ 572.99 USD

Only available at this price

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

Ships in 9 Business Days

$ 959.99 USD

Only available at this price

Add to Wish List

Qty

$ 959.99 USD

Only available at this price

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Nostrum Stage 2 DI Injectors - S55/N55

T#:9609825

Part#: H703-1257

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Only available at this price

Add to Wish List

Qty

$ 1,799.00 USD

Only available at this price

Add to Wish List

The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.

Show More Show Less

Injector Seal - Priced Each

T#:6460320

Part#: 13537584315

In Stock

$ 2.03 USD

Only available at this price

Add to Wish List

Qty

$ 2.03 USD

Only available at this price

Add to Wish List

BMW N54 N63 N74 Injector Seal - Priced Each

T#:6460319

Part#: 13537584315

In Stock

$ 3.85 USD

Only available at this price

Add to Wish List

Qty

$ 3.85 USD

Only available at this price

Add to Wish List

BMW N54 N63 N74 Injector Seal is a crucial component for maintaining the performance and efficiency of your BMW's fuel injection system. This high-quality seal, located at the end of the injector, ensures a tight fit, preventing fuel leaks and maintaining optimal engine operation. Each seal is sold individually, with one required per injector, making it an essential part of any injector maintenance or replacement.

Precision Fit: Specifically designed for BMW N54, N63, and N74 engines.
Prevents Fuel Leaks: Ensures a secure seal at the injector tip.
Maintains Engine Efficiency: Helps maintain optimal engine performance by preventing air and fuel leaks.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Replacement: Direct fitment for hassle-free installation.

Show More Show Less

Genuine BMW Decoupling Element - 13537577649

T#:42226

Part#: 13537577649

In Stock

$ 16.76 USD

Only available at this price

Add to Wish List

Qty

$ 16.76 USD

Only available at this price

Add to Wish List

Genuine BMW Decoupling Element -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less

Injector Seal

T#:15015295

Part#: 13537591006

In Stock

$ 4.39 USD

Only available at this price

Add to Wish List

Qty

$ 4.39 USD

Only available at this price

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

Pro-Line Injector And Glow Plug Grease - 20g

T#:49787695

Part#: 22243

In Stock

$ 6.99 USD

Only available at this price

Add to Wish List

Qty

$ 6.99 USD

Only available at this price

Add to Wish List

This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

Injector Seals - N54 N63 N74

T#:42234

Part#: 13537584315

In Stock

1% off MSRP $ 6.38

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6.30 USD

Only available at this price

Add to Wish List

Qty

1% off MSRP

$ 6.38

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6.30 USD

Only available at this price

Add to Wish List

Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E82 1M Coupe,E70 X5 X5,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F10,F12,F13

Fits BMW Engines including:
N54,N54T,N63,N63N,S63

Show More Show Less

Bosch Injector Seal

T#:591890

Part#: 13537591006

Ships in 1 Business Day

$ 4.99

This product was last offered at the strikethrough price on
07-23-2026

$ 4.07 USD

Only available at this price

Add to Wish List

Qty

$ 4.07 USD

Only available at this price

Add to Wish List

Seal that goes from the end of the injector to the motor

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

T#:26038542

Part#: BMW-EPI-950

Ships on Sep 18, 2026

$ 1,188.00 USD

Only available at this price

Add to Wish List

Qty

$ 1,188.00 USD

Only available at this price

Add to Wish List

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

Precision Raceworks Stage 2 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004857

Part#: 201-0260

Ships in 5 Business Days

$ 1,599.00 USD

Only available at this price

Add to Wish List

Qty

$ 1,599.00 USD

Only available at this price

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 55% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679243

Part#: 501-0116

Ships in 7 Business Days

$ 884.99 USD

Only available at this price

Add to Wish List

Qty

$ 884.99 USD

Only available at this price

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

T#:18003817

Part#: PRINJPLGS

Ships in 9 Business Days

Starting at $ 9.99 USD

Only available at this price

Add to Wish List

Starting at $ 9.99 USD

Only available at this price

Add to Wish List

Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 4 Bar

T#:38195450

Part#: 601-0259

Ships in 9 Business Days

$ 64.99 USD

Only available at this price

Add to Wish List

Qty

$ 64.99 USD

Only available at this price

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N54/...

T#:38262760

Part#: 601-0227

Ships in 9 Business Days

$ 429.99 USD

Only available at this price

Add to Wish List

Qty

$ 429.99 USD

Only available at this price

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Project Cars

SELECT YOUR BMW

Fuel Injectors for BMW X Series F16 (2015+)

Vitesco Fuel Injector With Seal Ring - Index 12 - BMW N54 N63 S63 ...

Port Injector Plugs

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...

BMW Injector Sockets - 17mm & 14mm

BMW (N54/N63/S63) Injector Line Socket

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

Precision Raceworks In-Line Micro Regulator - 5 Bar

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1600cc -...

Vitesco - Fuel Injector Replacement Kit - Index 12 - N63, S63 Engines...

Precision Raceworks In-Line Micro Regulator - 6 Bar

BMS JB4 Port Injection Controller - F/G Chassis

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

Nostrum Stage 2 DI Injectors - S55/N55

Injector Seal - Priced Each

BMW N54 N63 N74 Injector Seal - Priced Each

Genuine BMW Decoupling Element - 13537577649

Injector Seal

Pro-Line Injector And Glow Plug Grease - 20g

Injector Seals - N54 N63 N74

Bosch Injector Seal

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

Precision Raceworks Stage 2 Upgraded Fuel Injectors - Set Of 6 - BMW ...

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

Precision Raceworks In-Line Micro Regulator - 4 Bar

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N54/...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results