BMW X Series F16 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

OEM INA Accessory Belt Tensioner Assembly - N55 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:394063
Part#: 11288604266
In Stock
$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 60.99 USD
Only available at this price
Free Shipping on orders $49 and up

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less
APEX Wheels - Corporate Logo
T#:26171623
Part#: HW-APX-M14125-90
Ships in 2 Business Days
$ 160.00 USD
Only available at this price
Free Shipping
$ 160.00 USD
Only available at this price
Free Shipping

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

  • Enhanced strength and safety
  • Improved pit stop times
  • Simplified wheel installation and removal
  • Versatility with extended length wheel studs
  • Reduced wear on hub threads
  • Long-term durability and safety
  • Simplified maintenance and improved efficiency
Show More Show Less
OEM INA Deflection Pulley - N55 3.0L, S55 3.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554453
Part#: 11288673720
In Stock
$ 45.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 45.99 USD
Only available at this price
Free Shipping on orders $49 and up
Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

OEM INA Idler Pulley -- N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:402395
Part#: 11287615130
In Stock
$ 35.34

This product was last offered at the strikethrough price on
05-06-2026

$ 24.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 24.99 USD
Only available at this price
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less

Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Only 0 available at this price
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Only 0 available at this price
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Only available at this price
Free Shipping
$ 243.99 USD
Only available at this price
Free Shipping

Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 49.99 USD
Only available at this price
Free Shipping on orders $49 and up
OBDII Code Reader
Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 62.99 USD
Only available at this price
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.

APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 459.00 USD
Only available at this price
$ 459.00 USD
Only available at this price
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 469.00 USD
Only available at this price
Free Shipping
$ 469.00 USD
Only available at this price
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Autel - Corporate Logo
T#:2914129
Part#: AL529HD
Ships in 6 Business Days
$ 264.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 264.99 USD
Only available at this price
Free Shipping on orders $49 and up
Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.
APEX Wheels - Corporate Logo
T#:599071
Part#: EC71995ET28RSKT
Ships in 5 Business Days
$ 1,876.00 USD
Only available at this price
$ 1,876.00 USD
Only available at this price
Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45


OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 15.99 USD
Only available at this price
Free Shipping on orders $49 and up
Hydraulic valve lifter
Ina - Corporate Logo
T#:42167254
Part#: FB0211K
Back Ordered
$ 153.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 153.99 USD
Only available at this price
Free Shipping on orders $49 and up
The Accessory Drive Belt Kit from Turner Motorsport is the ideal choice for BMW owners seeking dependable performance, easy installation, and long-lasting engine accessory function.
Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD
Only available at this price
Free Shipping on orders $49 and up
$ 28.95 USD
Only available at this price
Free Shipping on orders $49 and up

APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
Ships in 9 Business Days
$ 9.99 USD
Only available at this price
Free Shipping
$ 9.99 USD
Only available at this price
Free Shipping

APEX Wheels - Corporate Logo
T#:201364
Part#: EC71995ET22AN
Back Ordered
$ 459.00 USD
Only available at this price
$ 459.00 USD
Only available at this price
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:201374
Part#: EC719105ET22SMBK
Ships in 5 Business Days
$ 479.00 USD
Only available at this price
Free Shipping
$ 479.00 USD
Only available at this price
Free Shipping
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201376
Part#: EC719105ET22AN
Ships in 5 Business Days
$ 479.00 USD
Only available at this price
$ 479.00 USD
Only available at this price
19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x10.5"
Offset (mm):22
Weight (lbs):23.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 17.00 USD
Only available at this price
Free Shipping
$ 17.00 USD
Only available at this price
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less

Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Only available at this price
Free Shipping
$ 402.99 USD
Only available at this price
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less

Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Only available at this price
Free Shipping
$ 739.99 USD
Only available at this price
Free Shipping
Pinpoint and replace bad TPMS Sensors
APEX Wheels - Corporate Logo
T#:593645
Part#: HW-OEM-VALVE-GM
Ships in 2 Business Days
$ 15.00 USD
Only available at this price
Free Shipping
$ 15.00 USD
Only available at this price
Free Shipping
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 15.00 USD
Only available at this price
Free Shipping on orders $49 and up
$ 15.00 USD
Only available at this price
Free Shipping on orders $49 and up
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less


APEX Wheels - Corporate Logo
T#:201371
Part#: EC71910ET25SMBK
Ships in 5 Business Days
$ 469.00 USD
Only available at this price
Free Shipping
$ 469.00 USD
Only available at this price
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 6 Business Days
$ 12,306.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 12,306.99 USD
Only available at this price
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.
Autel - Corporate Logo
T#:40782369
Part#: AUL-TS508WFK-1
Ships in 6 Business Days
$ 419.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 419.99 USD
Only available at this price
Free Shipping on orders $49 and up
The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.
Show More Show Less

Autel - Corporate Logo
T#:2914140
Part#: MV400-55
Ships in 6 Business Days
$ 405.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 405.99 USD
Only available at this price
Free Shipping on orders $49 and up
This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.

APEX Wheels - Corporate Logo
T#:201357
Part#: EC71995ET43RS
Ships in 5 Business Days
$ 426.00 USD
Only available at this price
Free Shipping
$ 426.00 USD
Only available at this price
Free Shipping
19x9.5" ET43 APEX EC-7 Wheel 23lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):43
Weight (lbs):23
Profile:2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Ina - Corporate Logo
T#:42167242
Part#: FB0210K
Back Ordered
$ 127.99 USD
Only available at this price
Free Shipping on orders $49 and up
$ 127.99 USD
Only available at this price
Free Shipping on orders $49 and up
The Accessory Drive Belt Kit from Turner Motorsport is the ideal choice for BMW owners seeking dependable performance, easy installation, and long-lasting engine accessory function.

Deflection Pulley
For vehicles with a production date up to 03/2016
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:593550
Part#: 11288604267
Special Order: No Guaranteed ETA
$ 49.48 USD
Only available at this price
$ 49.48 USD
Only available at this price
APEX Wheels - Corporate Logo
T#:201361
Part#: EC71995ET33AN
Ships in 5 Business Days
$ 459.00 USD
Only available at this price
Free Shipping
$ 459.00 USD
Only available at this price
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201360
Part#: EC71995ET33RS
Ships in 5 Business Days
$ 459.00 USD
Only available at this price
Free Shipping
$ 459.00 USD
Only available at this price
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels - Corporate Logo
T#:201359
Part#: EC71995ET33SMBK
Ships in 5 Business Days
$ 459.00 USD
Only available at this price
Free Shipping
$ 459.00 USD
Only available at this price
Free Shipping
19x9.5" ET33 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x9.5"
Offset (mm):33
Weight (lbs):22.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
Ina - Corporate Logo
T#:42302013
Part#: VR02501
Back Ordered
$ 15.99 USD
Only available at this price
$ 15.99 USD
Only available at this price
Ticking or Misfire? Maintain your BMW’s performance and engine integrity with the OEM INA Engine Rocker Arm - N55