ECS for BMW X Series E70 (2007-2013)

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E70/E71 BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your BMW X5/X6! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for E70 X5 and E71 X6 applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part number 12427557027.

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Bavarian Autosport Water Pump (11517632426)