BMW 5 Series E34 (1987-1995)

Rogue Engineering Transmission Mounts - Pair - Multiple BMWs ...

T#:641617

Part#: TM

Back Ordered

$ 69.00 USD

Only available at this price

Add to Wish List

Qty

$ 69.00 USD

Only available at this price

Add to Wish List

Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Zinc-plated to prevent corrosion. Rogue Engineering Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Rogue Engineering transmission mounts are designed with street comfort in mind while still reducing left and right movement of the transmission. By using a cylindrical shape instead of the factory hourglass like design and utilizing Neoprene rubber deflection can be significantly reduced, minimizing unwanted transmission movement while maintaining vibration dampening characteristics.

Show More Show Less

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Only available at this price

Add to Wish List

Qty

$ 119.00 USD

Only available at this price

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Aluminum Thermostat Housing Kit - M50

T#:397222

Part#: 14-009

Ships on Sep 16, 2026

$ 56.99 USD

Only available at this price

Add to Wish List

Qty

$ 56.99 USD

Only available at this price

Add to Wish List

Plastic thermostat housing cracked on your M50?

Here are your choices: you can wait for the plastic factory thermostat housing cover to break and cause major overheating. (Even with a new stock cover, it won’t take long.) Or you can install a thoughtfully engineered all-aluminum thermostat housing cover from Active Autowerke and never experience this type of failure again. Currently there is no factory upgraded part to this problem. This is an aluminum extruded part that has all of the openings machine properly to fit like factory; from the mounting bolt holes, the seating of the thermostat to the sealing opening for the ORANGE gasket. Forged to exact factory tolerances, everything fits and this unit is a true easy bolt-on – especially suited for racing or load conditions like heavy traffic, where engine temp can rise rapidly. The housing is guaranteed never to break from overheating or over-tightening, and its CNC machined surface ensures a precise seat.

Unit comes complete with a new ORANGE sealing gasket; a new thermostat is recommended but not included.
For hotter climates, a 71 degree thermostat is recommended over the 82 degree unit.

Anything and everything BMW is the mantra at Active Autowerke. Since 1981 they have been serving the BMW community with custom turbocharger kits to a myriad of other innovative and inspiring performance parts.

Show More Show Less

Active Autowerke Rotrex Traction Fluid - One Liter

T#:397307

Part#: 12-032

Ships in 4 Business Days

$ 240.00 USD

Only available at this price

Add to Wish List

Qty

$ 240.00 USD

Only available at this price

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 4 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Only available at this price

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Only available at this price

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Water Temperature Sensor

T#:596874

Part#: 12621288158

Ships in 1-2 days

$ 44.99 USD

Only available at this price

Add to Wish List

Qty

$ 44.99 USD

Only available at this price

Add to Wish List

M14x1.5 Thread. Your vehicle is equipped with numerous gauges to allow you to have a better idea of what is going on under the hood. By monitoring these gauges, you can prevent premature engine damage due to low oil pressure or high coolant temperatures. If one isn't functional though, you are in the dark as far as that system goes. One of the most vital is coolant temperature. Replace the sensor to get your gauge working properly again.

Show More Show Less

Beru Spark Plug Connector - E34, E36

T#:367498

Part#: 12131730521

Ships in 1-2 days

$ 14.99

This product was last offered at the strikethrough price on
05-07-2026

$ 13.99 USD

Only available at this price

Add to Wish List

Qty

$ 13.99 USD

Only available at this price

Add to Wish List

Connects coil pack to spark plug

Project Cars

SELECT YOUR BMW

Sub-Categories

Rogue Engineering Transmission Mounts - Pair - Multiple BMWs ...

CNC Billet License Plate Bracket

Aluminum Thermostat Housing Kit - M50

Active Autowerke Rotrex Traction Fluid - One Liter

Active Autowerke Signature Trunk Emblem

Water Temperature Sensor

Beru Spark Plug Connector - E34, E36

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results